Double Glazing Lock Repairs

Good locks on your doors and windows will stop burglars from getting into your home. Generally, they don't like breaking glass or squeezing through windows that are not closed.

However, some double glazing owners have experienced issues with their door lock or window lock after it was installed. Fortunately, these issues are usually fixable and don't require to buy new double glazing.

Broken or faulty locks

If your uPVC window or door lock is damaged or defective and requires a locksmith, they can fix it for you. They can repair hinges, striker plates and locks for double glazing. They can also reposition the cylinder to fix any misalignment which could be causing your handle not to work properly.

If the key fits in the lock but doesn't turn or is difficult to insert, then the mechanism may be locked up. This can be caused by dirt or grime accumulating in the mechanism. If this is the situation, it may be possible for the lock to be cleaned and lubricated. It is essential to apply a dry lubricant such as graphite or teflon instead of oil, which can attract dirt and stick to the inside of the mechanism. After lubricating, insert the key into the lock and turn it. The lubricant will work through the mechanism and the lock should be able to rotate with ease.

A faulty lock can also be caused by loose screws inside the mechanism of the lock. They can become loose and break off or fall out completely which can stop the lock from working properly. The screws can be tightened with a screwdriver, Jere Alas but you must be cautious not to tighten them too much. This could damage the internal components.

A broken lock can be hazardous for your family and you. This is especially relevant if you have young children. It is possible for them to open the door without your knowledge, and this can give them access to your home. If you're concerned that this might occur, a licensed professional locksmith can help you secure the double-glazed doors.

Misty Glaze are a professional uPVC and jerealas.Top double glazing company in Lancing, who can repair all types of faulty and damaged mechanisms, handles, cylinders and lock systems on both uPVC windows and doors. We can also reconfigure your uPVC or double glazing locking system to meet your particular requirements, which means that in a lot of cases replacement doors and windows are not necessary.

Handles that are broken or damaged

As part of their overall security plan, many double-glazed windows have a multipoint lock. This is an excellent option for Jerealas.Top those who are concerned about potential burglars trying to gain entry to their home. It's also worth asking your installer about anti-lift locks that can be installed in addition to the locks that are already in place to will keep your window locked in a closed position.

It's not uncommon for handle locks to get damaged or fail - they are the first part of your window that will be forced open by criminals intent on breaking in. The good news is, this is one of easiest parts to repair.

Modern uPVC handles and aluminium handles are equipped with a multi-point locking mechanism known as Espagnolette, which is designed to ward off forced entry. This security upgrade is usually available as an extra on new uPVC window installation. As an upgrade option older style handles made of aluminium or uPVC that are no longer in use can be upgraded to shoot bolt locking systems.

It is essential to fix the handle as soon as possible if it is damaged. Handles that are damaged can prevent the window from closing correctly and also allowing drafts to enter. It could be a weakness that burglars who are opportunistic could exploit, therefore putting your belongings and family at risk of being stolen.

The process of fixing the failed mechanism starts with getting access to the window frame and then removing the damaged handle. The gearbox that opens the handle is then removed and the type of gear is identified, so that a replacement may be found that is in line with the profile of the internal window frame mechanisms.

Once the mechanism is replaced the handle can be fixed with the original screws - however, we generally recommend replacing them with larger ones because this will ensure a more secure fit. The final step is to seal the handle using a clear sealant. This will protect it from further corrosion. Once that's done, your window will be fully operational again and at less than the cost of replacing the entire window.

Hinges that are broken or faulty

If your windows do not shut properly, you could be experiencing draughts, an affliction of your home's security and a higher risk of damp or water damage. Window hinges that break or become faulty are a common occurrence and can be fixed easily.

If you have a window made of uPVC that won't open or close and close, it's likely that your hinges are damaged or broken and require replacement. Most window companies will require that you purchase a new window unit to fix this simple issue, but we are able to replace the hinges to save you money.

Window hinges are often damaged by repeated use, or they are weakened over time by corrosion. If you've got a broken window hinge, it's essential to take steps to prevent further damage. This means not causing the window to open or close.

The type of hinge you are looking for will help you locate the correct parts to fix it. Maco, Mila and Roto are all window hinges. Consult a professional to avoid purchasing parts that will not fit with your existing hardware. This could cause further damage.

Faulty hinges can be a major issue for your uPVC window and doors. They can be the main source of noise, and can also permit water to infiltrate your windows.

Check whether the pin barrels on both sides of the hinge are aligned. If it's not, tap the headpin with the hammer to create an incline in the hinge barrel. This will help keep the pin in the right position. Then, ask a helper to hold the door as you remove the hinges and hinge screws from both the doorjamb and the door. Replace the hinges and install screws with glue. When the glue is drying, secure the hinges using clamps or weights.

Once the hinges have been fixed after which you will be able to install the door and then reattach the handle. It is recommended to replace the screws using the same length of wood dowels as the original screw so that they are in line with each the other.

Broken or Faulty Glass

uPVC Windows can be damaged over time, despite the fact that they are great at keeping out the cold and keeping warmth. This could include cracked or damaged glass, as well as faulty locks. This is a problem that can be costly when left unattended. It can also hurt the appearance of your home and can cause a loss of insulation. It is essential to fix any damage as soon as it occurs.

If the glass is broken but isn't shattered, you can usually fix it yourself using the appropriate tools and techniques. Make sure the area surrounding the glass that has been broken is free of debris, so that shards do not cause injury or cause a trip hazard. Then, remove any broken glass pieces and dispose of them in the proper way. Then, apply masking tape over the entire area to stop shards from scattering and sticking to your skin when you move them. If you're dealing with a double-pane glass it's a good idea prepare the glass before gluing it back into place so that you know you'll have enough room to complete the project.

Use a dry, clean cloth to wipe down the glass's surface and the frame before applying the glue. Follow the application and curing instructions that differ from product-to-product. Based on the angle of the crack, you may need to secure the glass during the curing process with lightweight clamps that are designed to hold delicate materials.

Once the adhesive has fully cure, carefully insert the glass in the window frame. Make sure it is aligned with the frame's edge and that there aren't any gaps between the glass sash as well as the frame. Be careful not to bend the window as it's being put back in place, as this can weaken the seal and lead to condensation and water infiltration.

If you have a glass door that's completely broken or Jere alas has larger cracks, consult an experienced professional glazier such as O'Brien(r) to organise the replacement. Unattended handling of broken glass can be a risk to pet and children and is why it's important to act fast.